HP Laserjet p4015n duplex printing solutions and guide

HP Laserjet p4015n double-sided printing

The HP Laserjet P4015N duplex printing instructions are provided on this site. Initially, you need to set up the print job to print on both sides of the pages. Use these below instructions to make the changes in the printer driver settings.

STEPS FOR DUPLEX PRINTING THE DOCUMENT USING THE HP LASERJET P4015N

• Open the input tray of your printer and load enough plain paper into it.
• Open the document to print and click on the File menu.
• Click on the Print button and then choose the HP Laserjet P4015N printer.
• Click on Printer Properties, Printer Setup, or Preferences button.
• Choose the Layout, Finishing, or Features tab depending on which tab displays.
• Select the Print on Both Sides or Two-sided printing. Click on the OK option and select the Print button.
• Take the printed page out from the output tray and load it into the input tray.
• Choose the Continue option. The second side of the page gets to print.

HP LASERJET P4015N DUPLEX PRINTING INSTRUCTIONS

• To print the document on both sides, set up a print job, and go with the instructions given here. Go to the printer driver settings and make the necessary alterations. Depending on the printer type, flip the pages.
• To print the document on both sides, make use of the duplexing settings in the printer driver. Make sure the paper tray is loaded with sufficient media.
• To finish the print job, place sufficient plain paper into the input tray. So that you can also prevent the page ordering issues arising on the printer.
• Open the input tray and load enough media into it if you have not loaded the paper tray with sufficient paper. Close the paper tray. Open the document you need to print on the PC.
• Search for the File menu and click on it. Select the Print option and choose the name of your printer. Search for the Printer Properties, Printer Setup, Preferences option from the shown options and click on it.
• See if the Document Properties or Printing Preferences window shows on the PC’s screen. If yes, then see if the Printing shortcuts tab is available. Tap the Print on Both Sides or Two-sided (Duplex) Printing option if available.
• Select the Layout, Features, or Finishing tab if the Printing Shortcut tab is not available. Choose the option depending on which tab appears. See if you can locate the Print on Both Sides or Two-sided printing button. If yes, then select the binding or page flip button.
• Click the Ok button and tap the Print option. Check and remove the printed page from the output tray. If it is a rear loading printer, flip the pages so that the printed side faces down. The bottom short edge should be loaded into the printer.
• If it is a front loading printer, load the stack printed side facing up (Inkjets) or facing down.
• Remove the printed page and insert it into the input tray of your printer. Choose the Continue option and the second side if the page prints.